IP65 Split Solar LED Street Light Powered by High Lumen SMD LED from Lumileds

Advantages of split solar street lights:

_{1.Flexible Installation:}

_{The split design makes the installation of solar street lights more flexible, especially in areas where trees or buildings are more shaded. Solar panels can be installed away from street lights to get more sunlight in areas without shade, while LED fixtures can be installed on roads or walking paths to ensure lighting effects.
2.High Adaptability:}

_{Split solar street lights are suitable for a variety of environmental conditions, especially in some places where it is difficult to directly install the panel with the luminaire. For example, some terrain or roads may require the positioning of the solar panels to be adjusted, which is easier to achieve with a split design.
3.Easy to transport and install:}

_{Since the individual components are packaged and shipped separately, the solar street lights with split design can be adjusted according to the specific conditions of the site during the installation process. Compared to one-piece solar street lights, the split design is easier to transport and is especially suitable for large-scale installations.
4.Improving energy efficiency:}

_{Due to the flexibility of the panels to be installed in the optimal light position, solar street lights with split designs are often more energy efficient than integrated designs. Especially in winter or areas with more rainy weather, the solar panels can be installed at an angle and orientation as needed to maximize the use of solar energy.
5.Reduced light pollution:}

_{The lamps and solar panels of the split solar street lights are installed separately to avoid excessive lighting and unnecessary light pollution. In some areas where lower brightness is required, the split design also facilitates fine control of light intensity.
6.Easy to service and upgrade:}

_{If the solar panels or batteries need to be replaced or upgraded, the split design makes it easier to operate. In the event of a failure, the replacement of individual components does not affect other components, reducing downtime.}